规格:根据客户KLINGER 米拉姆 PSS,KLINGER Milam PSS130,200,300,320
所属类型:平垫圈
是否标准件 | 标准件 | 材质 | 其它材料-KLINGER 米拉姆 PSS,KLINGER Milam PSS130,200,300,320 |
表面处理 | 厚度 | 根据客户 | |
标准类型 | 美标ASTM | 标准编号 | KLINGER 米拉姆 PSS,KLINGER Milam PSS130,200,300,320 |
内径 | 根据客户 | 外径 | 根据客户 |
品牌 | KLINGER 米拉姆 PSS,KLINGER Milam PSS130,200,300,320 |
专为苛刻的操作条件而设计的云母板
KLINGER 米拉姆 PSS,KLINGER Milam PSS130,200,300,320-宁波美图美
KLINGER Milam PSS 是一种无石棉密封材料,带有穿孔不锈钢加强件。这种高温云母基材料专门设计用于应对高温密封应用的严苛要求。它是排气管、涡轮机、涡轮增压器和燃油管线等使用场景的选择,可承受高达 1652°F (900°C) 的温度和高达 72 psi (5 bar) 的压力。
由于对溶剂、腐蚀性酸、碱和矿物油具有出色的耐化学性,这种材料制成的垫圈可用于多种行业。
该产品还提供 Milam H,一种高质量的均质云母片。
专为苛刻的操作条件而设计的云母板
KLINGER Milam PSS 是一种无石棉密封材料,带有穿孔不锈钢加强件。这种高温云母基材料专门设计用于应对高温密封应用的严苛要求。它是排气管、涡轮机、涡轮增压器和燃油管线等使用场景的选择,可承受高达 1652°F (900°C) 的温度和高达 72 psi (5 bar) 的压力。
由于对溶剂、腐蚀性酸、碱和矿物油具有出色的耐化学性,这种材料制成的垫圈可用于多种行业。
该产品还提供 Milam H,一种高质量的均质云母片。
典型值PSS 130PSS 150PSS 300
压缩性ASTM F 36 J | 12 - 20 % | 12 - 20 % | 18 - 26 % |
恢复ASTM F36 M | 30 - 45 % | 33 - 45 % | 25 - 38 % |
应力松弛DIN 52913, 50 MPa, 16 h / 300°C | 33兆帕 | ≤ 33 兆帕 | 30兆帕 |
燃烧损失DIN 52911 | < 5 % | < 5 % | < 5 % |
氮气在 30 MPa 和 6 bar 下的密封性 温度在 100 至 400 C 之间(样品尺寸 90 x 50 mm) |
0.20 毫升/分钟 |
0.20 毫升/分钟 |
1.0 毫升/分钟 |
浸入油 IRM 903 后厚度增加ASTM F 146 :5 小时/150°C |
12% |
12% |
12% |
浸入油 IRM 903 后重量增加ASTM F 146 :5 小时/150°C |
26% |
|
26% |
垫片负载 | 100兆帕 | - | 80兆帕 |
密度DIN 3754 | 2.1 克/立方厘米 | 2.1 克/立方厘米 | 2.1 克/立方厘米 |
持续工作温度 | 900 C° | 900 C° | 900 C° |
厚度 | 1.3 毫米 | 1.5 毫米 | 3.2 毫米 |
不锈钢嵌件数量 (EN 1.4401/AISI 316 (L) 在 0.1 毫米厚) |
1个 |
1个 |
1个 |
颜色 | 棕色的 | 棕色的 | 棕色的 |
主要特点和优势
» 优异的耐化学性
» 的耐高温性
» 用于排气系统
» 抗氧化性
» 不含纤维
证书和批准
» 德国劳埃德
所示压力/温度图是确定垫圈材料在已知环境中适用性的新方法。但是,还必须考虑化学相容性。
厚度 2.0 mm 的 pT 图:
在区域 1 中,垫圈材料适合使用受化学兼容性影响的常见安装实践
在区域 2 中,需要采取适当的措施来安装垫圈以确保性能。请致电或咨询 KLINGERexpert 寻求帮助。
在区域 3 中,如果没有先咨询 KLINGERexpert 或联系 KLINGER Thermoseal 的技术支持服务,请勿在这些应用中安装垫圈。
该图显示了组装时密封特定密封等级所需的应力。图形的确定基于 EN13555 测试程序,使用 100°C 的氦气。倾斜曲线表示垫圈随着垫圈升高而增加密封性的能力。
垫圈形成和保持密封的能力不仅取决于垫圈材料的类型和质量,还取决于被密封的介质、法兰设计、螺栓对垫圈施加的压力大小以及垫圈如何组装到法兰上并拧紧。这些因素超出了制造商的控制范围。请注意我们在技术资源中的安装手册。
典型值PSS 130PSS 150PSS 300
压缩性ASTM F 36 J | 12 - 20 % | 12 - 20 % | 18 - 26 % |
恢复ASTM F36 M | 30 - 45 % | 33 - 45 % | 25 - 38 % |
应力松弛DIN 52913, 50 MPa, 16 h / 300°C | 33兆帕 | ≤ 33 兆帕 | 30兆帕 |
燃烧损失DIN 52911 | < 5 % | < 5 % | < 5 % |
氮气在 30 MPa 和 6 bar 下的密封性 温度在 100 至 400 C 之间(样品尺寸 90 x 50 mm) |
0.20 毫升/分钟 |
0.20 毫升/分钟 |
1.0 毫升/分钟 |
浸入油 IRM 903 后厚度增加ASTM F 146 :5 小时/150°C |
12% |
12% |
12% |
浸入油 IRM 903 后重量增加ASTM F 146 :5 小时/150°C |
26% |
|
26% |
垫片负载 | 100兆帕 | - | 80兆帕 |
密度DIN 3754 | 2.1 克/立方厘米 | 2.1 克/立方厘米 | 2.1 克/立方厘米 |
持续工作温度 | 900 C° | 900 C° | 900 C° |
厚度 | 1.3 毫米 | 1.5 毫米 | 3.2 毫米 |
不锈钢嵌件数量 (EN 1.4401/AISI 316 (L) 在 0.1 毫米厚) |
1个 |
1个 |
1个 |
颜色 | 棕色的 | 棕色的 | 棕色的 |
主要特点和优势
» 优异的耐化学性
» 耐高温性
» 用于排气系统
» 抗氧化性
» 不含纤维
证书和批准
» 德国劳埃德
所示压力/温度图是确定垫圈材料在已知环境中适用性的新方法。但是,还必须考虑化学相容性。
厚度 2.0 mm 的 pT 图:
在区域 1 中,垫圈材料适合使用受化学兼容性影响的常见安装实践
在区域 2 中,需要采取适当的措施来安装垫圈以确保性能。请致电或咨询 KLINGERexpert 寻求帮助。
在区域 3 中,如果没有先咨询 KLINGERexpert 或联系 KLINGER Thermoseal 的技术支持服务,请勿在这些应用中安装垫圈。
该图显示了组装时密封特定密封等级所需的应力。图形的确定基于 EN13555 测试程序,使用 100°C 的氦气。倾斜曲线表示垫圈随着垫圈升高而增加密封性的能力。
垫圈形成和保持密封的能力不仅取决于垫圈材料的类型和质量,还取决于被密封的介质、法兰设计、螺栓对垫圈施加的压力大小以及垫圈如何组装到法兰上并拧紧。这些因素超出了制造商的控制范围。请注意我们在技术资源中的安装手册。
Mica sheet engineered for demanding operating conditions
KLINGER Milam PSS is an asbestos-free sealing material with a perforated stainless steel reinforcement. This high temperature, mica-based material is specifically designed to master the rigors of high-temperature sealing applications. It is the preferred choice for utilization scenarios such as exhaust pipes, turbines, turbochargers and fuel lines and can withstand temperatures of up to 1652°F (900°C) and pressures up to 72 psi (5 bar).
Because of its excellent chemical resistance to solvents, aggressive acids, alkalis and mineral oils, gaskets from this material can be used in a variety of industries.
This product is also available as Milam H, a high-quality homogeneous mica sheet.
TYPICAL VALUESPSS 130PSS 150PSS 300
Compressibility ASTM F 36 J | 12 - 20 % | 12 - 20 % | 18 - 26 % |
Recovery ASTM F36 M | 30 - 45 % | 33 - 45 % | 25 - 38 % |
Stress relaxation DIN 52913, 50 MPa, 16 h / 300°C | 33 MPa | ≤ 33 MPa | 30 MPa |
Ignition loss DIN 52911 | < 5 % | < 5 % | < 5 % |
Sealability for nitrogen at 30 MPa und 6 bar Temperature within 100 to 400 C max (sample size 90 x 50 mm) |
0.20 ml/min |
0.20 ml/min |
1.0 ml/min |
Thickness increase ASTM F 146 after immersion in Oil IRM 903: 5h / 150°C |
12 % |
12 % |
12 % |
Weight Increases ASTM F 146 after immersion in Oil IRM 903: 5h/150°C |
26 % |
|
26 % |
Max, gasket load | 100 MPa | - | 80 MPa |
Density DIN 3754 | 2.1 g/cm³ | 2.1 g/cm³ | 2.1 g/cm³ |
Continuous operating temperature | 900 C°max | 900 C°max | 900 C°max |
Thickness | 1.3 mm | 1.5 mm | 3.2 mm |
Number of stainless steel inserts (EN 1.4401/AISI 316 (L) at 0.1 mm thick) |
1 |
1 |
1 |
Color | Brown | Brown | Brown |
KEY FEATURES & BENEFITS
» Excellent chemical resistance
» Superior high temperature resistance
» Recommended for exhaust systems
» Extremely high oxidation resistance
» Free of fibers
CERTIFICATES & APPROVALS
» German Lloyd
The pressure/temperature graphs shown are the most current method of determining the suitability of a gasket material in a known environment. However, chemical compatibility must also be considered.
pT diagram for thickness 2.0 mm:
In area 1 the gasket material is suitable using common installment practices subject to chemical compatibility
In area 2 appropriate measures are necessary for installation of the gasket to ensure maximum performance. Please call or refer to KLINGERexpert for assistance.
In area 3 do not install gaskets in these applications without first referring to KLINGERexpert or contacting KLINGER Thermoseal's technical support service.
The graph shows the required stress at assembling to seal a certain tightness class. The determination of the graph is based on EN13555 test procedure with Helium at 100°C. The sloping curve indicates the ability of the gasket to increase tightness with raising gasket.
The ability of a gasket to make and maintain a seal depends not only on the style and quality of the gasket material, but also on medium being sealed, the flange design, the amount of pressure applied to the gasket by the bolts and how the gasket is assembled onto the flanges and tightened. These factors are beyond the manufacturer's control. Please take note of our installation manual in TECHNICAL RESOURCES.
经营模式:生产型
所在地区:浙江 宁波
免责声明:以上信息由企业自行提供,内容真实性、准确性和合法性由发布企业负责,标准件网不承担任何保证责任。
风险防范建议:为保障您的利益,建议优先选择标准件网认证会员。